AXCELA H is a carbide-tipped bandsaw blade designed for cutting difficult materials such as high-strength alloys, heat-resistant steels and nickel- and titanium-based superalloys.
The tooth geometry, optimised for heavy-duty applications, ensures high penetration capability and superior wear resistance even under extreme cutting conditions.
Thanks to the Triple-Chip tooth profile configuration and precision-ground set, AXCELA H provides cutting stability and reliability even on highly abrasive materials.
The AXCELA H-AP (Anti-Pinching) version is designed for applications where cut closure occurs, improving blade movement and increasing tool life.
Find the recommended bandsaw blade for your material in our Bandsaw Blade Selection Guide.
AXCELA H and AXCELA H-AP are available in various height, thickness and pitch configurations to suit difficult materials and different cutting conditions.
Selecting the correct pitch and version (standard or AP) is essential to ensure stability, tool life and optimal performance, particularly on materials prone to cut closure.
| Width | Thickness | 0.5/0.8 V5 | 0.9/1.1 V5 | 1.4/1.6 V5 | 1.8/2 V4 | 2/3 V4 | 3/4 V4 |
| 34 | 1.1 | ○ | ○ | ||||
| 41 | 1.3 | ○ | ● | ● | ○ | ||
| 54 | 1.6 | ○ | ● | ○ |
V4 = group of 4 teeth, V5 = group of 5 teeth
| Width | Thickness | 0.5/0.8 V5 AP | 0.9/1.1 V5 AP | 1.4/1.6 V5 AP |
| 54 | 1.6 | ● | ||
| 67 | 1.6 | ● | ● | |
| 80 | 1.6 | ○ | ○ |
AP = Anti Pinching – recommended for materials with a tendency to close during cutting.
● Standard size
○ Special size
