AMADA EU: GS-II / GX-II

High performance, accurate and reliable shearing from AMADA

It is crucial that the flow of blanks, the starting point for the entire manufacturing process, is managed with utmost quality and speed. These two criteria are entrenched in the design and manufacture of AMADA’s GS-II and GX-II sheet metal shears.
The rigidity of the frame, as well as the drive and adjustment solutions, ensure an exceptional degree of reliability and safety of use.
Beyond the technical considerations, these machines were developed with an improvement in working conditions, safety and ergonomics features in mind.

Download brochure

MOTORISED BACK GAUGE

The high-precision ball screw driven back gauge moves at 100 mm/s and has a positioning accuracy of 0.1 mm (0.05 mm repeatability).

You can program the crossbeam of the back gauge to retract to avoid contact as the material falls away following shearing.

EFFECTIVE MATERIAL HOLD DOWN CLAMPS

The clamps use pressure which is proportional to the cutting force; they are equipped with polyurethane pads and apply even pressure to ensure optimum clamping results without marking the product, regardless of the raw material thickness.

RIGID BOX CONSTRUCTION

The rigid box construction reduces any deformation under load ensuring a consistent gap between the blades.

The blade holder is driven by two sets hydraulic cylinders.

The 2°-inclination from the upper blade bracket gives the blade the ideal angle of attack.

OPTIONAL SHEET SUPPORT AND CONVEYOR

The machine can be upgraded with an optional pneumatic sheet support or a belted conveyor with sheet support and scrap collector.

Hotspots

EASY CLEARANCE ADJUSTMENT: You can easily set the gap between the blades and the cutting angle by using levers on the GS-II model. This is automatic on the GX-II model based on the material thickness you enter on the keypad.

EASY PROGRAMMING: The AMADA keypad was designed with the user in mind. Equipped with a touchscreen, it automatically manages all the cutting parameters. It has a 50 program memory. The keypad can be pivoted up to 90° so the operator can see the program sequence.

ERGONOMIC FRONT BENCH: Designed to help mount the numerous optional accessories such as front supports, front brackets with or without micrometric stop. There are two types of workbench: - Smooth bench as standard on the GS-II - Table supports with roller bearings as standard on the GX-II (optional on the GS-II)

	GS II-630	GS II-840	GS II-1230
Cutting force (kN)	197	271	361
Cutting length (mm)	3050	4050	3050
Stroke (mm)	160	190	190
Maximum speed (cuts/min)*	33	29	29
Material thickness (max.):
Mild steel (mm)	6.35	8	12
Stainless steel (mm)	4	6	8
Aluminium (mm)	8	10	14
Dimensions:
Length (mm)	3790	4810	3850
Width (mm)	2250	2510	2390
Height (mm)	1866	2040	2040
Weight (kg)	6150	11530	7510

	GX II-630	GX II-840	GX II-1230
Cutting force (kN)	197	271	361
Cutting length (mm)	3050	4050	3050
Stroke (mm)	160	190	190
Maximum speed (cuts/min)*	33	29	29
Material thickness (max.):
Mild steel (mm)	6.35	8	12
Stainless steel (mm)	4	6	8
Aluminium (mm)	8	10	14
Dimensions:
Length (mm)	3790	4810	3850
Width (mm)	2250	2510	2390
Height (mm)	1866	2040	2040
Weight (kg)	6150	11530	7510

* cutting a length of 100 mm

Technical data can vary depending on configuration / options
Please contact us for more details and options or download our brochure

For your safe use.
Be sure to read the user manual carefully before use.
When using this product, appropriate personal protection equipment must be used.

Mobile Navigation

GS-II / GX-II