Group Divisions
|
Greece - EL
Αλλαγή χώρας

Mobile Navigation

SDE i3 - SDEW i3 Series

DIGITAL ELECTRIC SERVO PRESSES

/
Επιστροφή στη λίστα
  1. Προϊόντα
  2. Μηχανές και Αυτοματισμός
  3. Stamping Presses
  4. SDE i3 - SDEW i3 Series

Digital electric servo presses to open a world of unprecedentedly high value added forming

Digital AC servo press machines are the latest environmentally conscious products due to reduction of power consumption, lubricating oil consumption and stamping noise. The SDE i3 / SDEW i3 stamping presses allow high accuracy processing thanks to the setting of the motions. For example, the SDE i3 / SDEW i3 can produce a perfectly sheared edge on inside and outside diameters, form small-diameter cylindrical parts without cracking, prevent wrinkling, and also prevent surface scratching.

 

DIGITAL SERVO DIRECT DRIVE

The fusion of servo motor dedicated to stamping presses and the proven crank mechanism provides optimum speed and position control achieving unprecedented improved productivity and high-valued added forming.

TWELVE KINDS OF MOTIONS

By selecting the most relevant motion path according to the product, it is possible to improve formability, accuracy, and reduce cost. It enables the optimum forming or specific parts.

EASY TO PROGRAM

Simple Selectable Motion Programming (SSMP): the new standard process sample programming, along with motion sample programming and motion editing, makes the i3 control significantly more simple and easy to program, even for less experienced users.

OPERABILITY OF THE SCREEN

Three types of basic operation mode screens are provided for ease of use. Verifying the necessary information in each operation mode can be done quickly and easily.

AUTOMATIC SLIDE ADJUSTMENT

The automatic slide adjustment functions allows the operator to adjust the die height according to a previously programmed job memory setting. This reduces setup time and eliminates the chance of inputting the wrong setting.

ECO-FRIENDLY

AMADA’s servo press machines are ECO machines, or environmentally conscious products, which contribute to environmental impact reduction and working environment improvement.

Hotspots

OPERATION CONTROL PANEL: The layout has been redesigned, improving operability.
SOFTWARE FOR STAMPING PRESS MACHINES: Visualization of press operating conditions and maintenance information with touch screen PC.
SWIVEL PENDANT CONTROL PANEL: The pendant control panel, with a 12.1" wide screen, can be rotated to improve visibility and operability. Each i3 control is equipped with the enhanced load/torque monitoring system, which is more advanced than your normal tonnage monitor.
OPERATION CONTROL PANEL: The layout has been redesigned, improving operability.
SOFTWARE FOR STAMPING PRESS MACHINES: Visualization of press operating conditions and maintenance information with touch screen PC.
SWIVEL PENDANT CONTROL PANEL: The pendant control panel, with a 12.1" wide screen, can be rotated to improve visibility and operability. Each i3 control is equipped with the enhanced load/torque monitoring system, which is more advanced than your normal tonnage monitor.

τεχνικά δεδομένα

SINGLE CRANK MODELS SDE8018î3  SDE1120i3  SDE1515i3  SDE1522i3
Frame type SF SF SF (GORIKI)* SF
Capacity (kN) 800 1100 1500 1500
Stroke length (mm) 180  200 150 225
Strokes/min (mm) ~80 ~70 ~95 ~60
Die height (mm) 350 390 380 430
Slide adjustment (mm) 80 100 100 100
Slide area (mm)
left right x front-back		 550 x 450 600 x 500 950 x 580 700 x 550
Bolster area (mm)
left right x front-back		 940 x 620 1030 x 700 1290 x 750 1160 x 750
Bolster thickness (mm) 135 150 160 160
Working height (mm) 850 850 900 900
Side opening (mm) 500 620 580 680
Max. upper die weight (kg) 240 300 1260 600
Servo motor (c. rated output) (kW) 25 30 35 35
Machine height (mm) 2915 3075 3290 3435
Machine mass (ton) 9.5 13 18 19.6

* SF (GORIKI) is for progressive processing
 

SINGLE CRANK MODELS SDE2017i3  SDE2025i3  SDE3020i3 SDE3030i3
Frame type SF (GORIKI)* SF SF (GORIKI)* SF
Capacity (kN) 2000 2000 3000 3000
Stroke length (mm) 175 250 200 300
Strokes/min (mm) ~75 ~55 ~60 ~40
Die height (mm) 415 460 460 550
Slide adjustment (mm) 110 110 110 110
Slide area (mm)
left right x front-back		 1050 x 650 850 x 630 1350 x 750 1100 x 750
Bolster area (mm)
left right x front-back		 1420 x 850 1290 x 850 1740 x 900 1380 x 900
Bolster thickness (mm) 180 180 200 200
Working height (mm) 1000 1000 1055 1055
Side opening (mm) 650 770 790 770
Max. upper die weight (kg) 1030 1020 1350 990
Servo motor (c. rated output) (kW) 40 40 50 50
Machine height (mm) 3670 3875 4420 4515
Machine mass (ton) 25 25.4 42 38.4

* SF (GORIKI) is for progressive processing
 

DOUBLE CRANK MODELS SDEW2025i3  SDEW3025i3 
Frame type SF SF
Capacity (kN) 2000 3000
Stroke length (mm) 250 250
Strokes/min (mm) ~50 ~45
Die height (mm) 500 550
Slide adjustment (mm) 110 120
Slide area (mm)
left right x front-back		 1750 x 650 2000 x 700
Bolster area (mm)
left right x front-back		 2150 x 850 2400 x 950
Bolster thickness (mm) 180 200
Working height (mm) 1000 1100
Side opening (mm) 720 720
Max. upper die weight (kg) 1320 1465
Servo motor (c. rated output) (kW) 40 50
Machine height (mm) 3775 4215
Machine mass (ton) 33 45

Τα τεχνικά δεδομένα μπορεί να ποικίλλουν ανάλογα με τη διαμόρφωση και τις επιλογές
Επικοινωνήστε μαζί μας για περισσότερες λεπτομέρειες και επιλογές εξοπλισμού ή κάντε λήψη του φυλλαδίου μας

Για την ασφαλή σας χρήση
Βεβαιωθείτε ότι έχετε διαβάσει προσεκτικά το εγχειρίδιο χρήσης πριν από τη χρήση.
Κατά τη χρήση αυτού του προϊόντος, πρέπει να χρησιμοποιείται κατάλληλος ατομικός προστατευτικός εξοπλισμός.

FORM

Επικοινωνήστε μαζί μας

Βρίσκεστε σε Μηχανές και Αυτοματισμός | Stamping Presses | SDE i3 - SDEW i3 Series. Μπορεί επίσης να σας ενδιαφέρει:

TPW-FX & TPWL-FX Series