ENSIS-AJ

/

ENSIS-AJ fibre lasers offer high speed piercing and fast cutting. Ideal for a wide range of different materials and thicknesses

Available with 3, 6, 9 and 12kW fibre laser engines developed by AMADA using 3 and 4kW diode modules, the ENSIS-AJ range considerably increases your production capacity. The 6 kW, 9kW and 12kW versions utlise AMADA’s Auto Collimation system, for unrivalled laser beam spot control. Combined with AMADA's original Variable Beam Control technology to adjust the laser mode, this system can process different materials and thicknesses with a single cutting lens. The quality and processing speeds for medium to thick materials, as well as very high-speed piercing, make the ENSIS-AJ the perfect machine to increase your profitability.

BROCHURE

ENSIS TECHNOLOGY

ENSIS technology is based on the Variable Beam Control Unit which can fully control and modulate the laser beam. The ENSIS-AJ not only controls the beam diameter and focal point, it changes the beam mode depending on the material and thickness to be processed. Now utilizing 3, 6, 9 and 12kW AMADA fibre laser engines, the correct power requirement can be determined on an individual basis with our customers.

PROCESS RANGE EXPANSION

The ENSIS-AJ expands the thickness range achievable with a fibre laser, while retaining the thin material cutting capabilities of this technology. 
For example, it can cut 25 mm mild steel with 3 kW of power.

WATER-COOLED CUTTING

The machine is equipped with WACS II (Water Assisted Cutting System) to maintain a constant temperature of the raw material to process, guaranteeing stable cutting of thicker mild steel. It also allows thin wall thicknesses to be processed, increasing sheet utilisation and lowering cost-per-part.

HIGH SPEED PIERCE

Thanks to its ability to change the beam mode between piercing and cutting, the ENSIS-AJ has very quick pierce rates on medium to thick material. The 9kW and 12kW can pierce 25mm mild steel in 1 second.

CLEAN FAST CUT

Clean Fast Cut is a new technology from AMADA which optimises assist gas usage and increases cutting speed, in some cases by nearly twice the speed. This ensures lower cost-per-part and higher productivity.

SILKY CUT

AMADA's SILKY CUT technology is a revolutionary innovation in fibre laser cutting. This function modulates the beam and gas flow to achieve a high cutting performance for medium thickness stainless steel, which is comparable to CO₂ laser cutting, as well as a minimum roughness and very high-quality edges.

Hotspots

VARIABLE BEAM CONTROL UNIT & AUTO-COLLIMATION SYSTEM:

With ENSIS technology, we can modify the mode of the laser beam based on the material thickness, guaranteeing an outstanding performance whilst using a single lens for all materials and thicknesses. Thanks to the Auto Collimation system (on the 6, 9 and 12kW versions), the full processing power of the laser can be used without compromise.

AMADA FIBRE LASER ENGINE:

AMADA was the first laser machine manufacturer worldwide to develop its own fibre laser engine in-house, specifically designed for cutting. Beam density and cutting quality have been improved and maintenance costs drastically reduced.

SIDE DOOR:

The ENSIS-AJ has been fitted with large front and side opening doors, for more convenient and flexible access to the cutting area.

Technical Data

ENSIS-3015AJENSIS-3015AJENSIS-3015AJENSIS-3015AJ
Laser power (W)30006000900012000
Machine typeFibre laser cutting machineFibre laser cutting machineFibre laser cutting machineFibre laser cutting machine
Working range X x Y (mm)3070 x 15503070 x 15503070 x 15503070 x 1550
Working range Z-axis (mm)100100100100
Repeatable positioning accuracy (mm)± 0.01± 0.01± 0.01± 0.01
Table loading weight (kg)920920920920
Drive systemAC Servo drives AC Servo drives AC Servo drives AC Servo drives

Material thickness (max.)*:
- Mild steel (mm)25252525
- Stainless steel (mm)15252525
- Aluminium (mm)12252525
- Brass (mm)8151818
- Copper (mm)6121212

Dimensions:
Length (mm)**10136101361013610136
Width (mm)2840284028402840
Height (mm)2432243227302500
Weight (kg)9100950096009700
ENSIS-4020AJENSIS-4020AJENSIS-4020AJENSIS-4020AJ
Laser power (W)30006000900012000
Machine typeFibre laser cutting machineFibre laser cutting machineFibre laser cutting machineFibre laser cutting machine
Working range X x Y (mm)4070 x 20504070 x 20504070 x 20504070 x 2050
Working range Z-axis (mm)100100100100
Repeatable positioning accuracy (mm)± 0.01± 0.01± 0.01± 0.01
Table loading weight (kg)1570157015701570
Drive systemAC Servo drives AC Servo drives AC Servo drives AC Servo drives

Material thickness (max.)*:
- Mild steel (mm)25252525
- Stainless steel (mm)15252525
- Aluminium (mm)12252525
- Brass (mm)8151818
- Copper (mm)6121212

Dimensions:
Length (mm)**12080120801208012080
Width (mm)3360336033603360
Height (mm)2432243227302500
Weight (kg)12200128001290013000

* Maximum thickness value depends on material quality and environmental conditions
** Machine + shuttle table (LSTe)

Technical data can vary depending on configuration / options
Please contact us for more details and options or download our brochure

For your safe use.
Be sure to read the user manual carefully before use.
When using this product, appropriate personal protection equipment must be used.

 

Laser class 1 when operated in accordance to EN 60825-1

 

Automation for ENSIS-AJ

Software

Our software solutions, ensuring “right first time” production.

More

Industry 4.0

Our Industry 4.0 solutions to optimise your production.

More

FORM

Contact Us